Das-audio Aero 48 User Manual download pdf (Page 19)

The cluster must now be lowered (10) until

the safety pins (11) on the rear side of box number 4

can be removed. Once safety pins have been released

the cluster must be raised or lowered (13) until the

hole in the G2A48 piece matches with the hole that

determinesthe anglechosen bythe user.

Safety pins can now be inserted (14). In this

example, the set up angle between boxes 3 and 4 is

4.8º.

The procedure is the same for the next

boxes. The cluster must be lowered again (15) until

the safety pins of box 3 are loose. Remove the pins

(16) so the G2A48 rear guides return to their stored

position (17). Insert the safety pins into the holes (18)

that determine the angle previously selected for

stacking. Repeat the same procedure with box

number 1: lower the cluster (19), free the rear guides

G2A48(20 &21) andselect theangle.

It is important to check that pins cannot be

removed by pulling outward and that they have been

inserted in the G2A48 hole instead of the guide slot.

Otherwise the box would not remain in the expected

angle.

4.8º

3.2º

46Aero-48 Manual del usuario/ User´s manual

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

No comments

Das-audio Aero 48 User Manual Page 19