Das-audio Aero 48 User Manual download pdf (Page 10)

Once the first box is attached to the

structure, the remaining boxes should be brought to

the array and attached repeating the previous steps (1

and 2) using G1A48 guides and safety pins per side

making sure that the pins have been inserted and

lockedcorrectly.

Proceed to attach the remaining units in the

same manner until all the array units are attached to

one another. For example, if we are assembling a six

unit array, the process will be repeated six times.

When all the units are attached, the complete array is

readyto behoisted.

When the rear of the enclosures come

together, the G2A48 rear guides should be positioned

(4) into the hardware of the box above, inserting (5)

the safety pins in the correct angle position. Since the

boxesare flown,the safety pins should bein theslot of

theG2A48 guide.

As the array assembly is lifted (6 & 7), the

PL-48 platformsshould beremoved.

G1A48

Once the complete array has been lifted into

place, additional slings should be attached to secure

thearray andavoid swinging.

The front motor will be used only to take up

slack in the chain, all the weight should be on the rear

hoist. When the wheels of the last enclosure are off

theground thearray canbe liftedwith bothmotors.

Rear hoist FIRST!!

37Aero-48 Manual del usuario/ User´s manual

G2A48

Rear hoist FIRST!!

The complete assembly should begin being

lifted from the rear hoist (3) so that the rear of the

enclosures come together due to their trapezoidal

shape. The front motor will be used only to take up

slack in the chain, all the weight should be on the rear

hoist. Proceed in this manner until the wheels of the

last enclosure are off the ground. From here on, the

arraycan nowbe liftedwith bothmotors.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 31 32

No comments

Das-audio Aero 48 User Manual Page 10