Das-audio Aero 48 User Manual download pdf (Page 13)

Once the two PL-48S_2 have been attached

to the boxes (3) using one safety pin per piece, the PL-

48S_1 pieces can be attached. Remove the safety

pins (4)and insert them into the rigging hardware (5)

securing them(6) byusing twopins perpiece.

Once the PL-48S_1 and PL-48S_2 have

been secured to the lower box, this should be lowered

so that the PL-48S_1 piece can be secured to the PL-

48Splatform (7)using thesafety pins.

The lowest box is now attached to the

platform. Now the array should be lowered until the

boxes are resting on one another. When the lower

three boxes are in this position, the safety pins

attached to the G2A48 guides joining boxes 3 and 4

should be removed to separate the array into two

groupsof boxes.

On flown systems, boxes are numbered

from top to bottom, the top box being number 1 and

thelower boxbeing numbersix.

With the number 4, 5 & 6 boxes resting on

each other, the safety pins that define the splay angle

can be removed (8) and the PL-48S_2 guides can

return to their stored position (9). It is mandatory to

remove the safety pins between boxes 3-4, but

between 4-5, and 5-6, they can be left in place with

theangle preparedfor thenext event.

40Aero-48 Manual del usuario/ User´s manual

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 31 32

No comments

Das-audio Aero 48 User Manual Page 13