Aero-48 MANUAL DEL USUARIO / USER’S GUIDE
Once the first box is attached to thestructure, the remaining boxes should be brought tothe array and attached repeating the previous steps (1and 2) u
Aero-48 Manual del usuario/ User´s manual 38
While the array assembly descends, therear of the enclosures will come together, at thatmoment, the safety pins which hold the G2A48guides in place sh
Once the two PL-48S_2 have been attachedto the boxes (3) using one safety pin per piece, the PL-48S_1 pieces can be attached. Remove the safetypins (4
Boxes 3-4 should be separated at the frontby removing the safety pins (10) that secure theG1A48guides.101211The first group of boxes has now been free
Continue lowering the systems and secure(16) the PL-48S_1 pieces to the front rigging points ofbox3, inserting2 safetypins ineach (17).The next step i
The arrangement in the following picture isan unstable one. The smaller the splay angle betweencabinets, the more the stability. Obviously, the mostre
Both PL-48S_1 pieces must now beattached (5) to the box on the bottom by means of twosafetypins oneach side.43After having rolled a PL-48S platform un
When the boxes are flown the safety pinsmust be inserted in the G2A48 slots. Now we want tostack the boxes, so the next step is to release the pinsfro
The cluster must now be lowered (10) untilthe safety pins (11) on the rear side of box number 4can be removed. Once safety pins have been releasedthe
Precauciones de Seguridad Safety PrecautionsEl signo de exclamación dentro de un triángulo indica la existencia de importantes instrucciones de ope
At this point the boxes are safely stacked.Finally, the AX-AERO48 grid should be detached fromboxnumber 1.1.6º4.8º3.2º2324In order to set up the angle
AERO-48 boxes can be easily transported ingroups of three when stacked on the PL-48S platform.This arrangement is also useful and saves time whensetti
Select the angle between cabinetsintroducing (5) the pins in the holes of the riggingsystemthrough theslot ofG2A48.0.8º1.6º553344The angles that can b
Place the remaining group of boxes underthecluster, then lower the cluster until bothfront sidesget in close proximity. G1A48 front guides (9) of thef
With the front guides correctly secured,swing the G2A48 (11) rear guides belonging to thebox on top of the second group and lower the grid tillthe gui
4. SIGNAL PROCESSINGAmplifierData:V=P*ZV/SV= P *ZLimitlevel (v)=V /GLimitlevel (dBu)=20log[limitlevel (v)/0.775]Where P is the maximum power to bedeli
DSP-3VSLINE INaero-48aero-485. SYSTEM CONNECTIONCONFIGURATION 1 (3 WAY STEREO SYSTEM FOR MID-LARGE SIZED VENUES)2 x 1200W@4ohm2 x 1200W@4ohm2 x 1200W@
DSP-3VSDSP-1SubLINE INELECTRONICS®ELECTRONICS®a SUBero-218aero-218SUBaero-48aero-482 x 1400W@4ohm±1LF ±1LFCH-A CH-BRECOMMENDED AMPLIFIERSCONNECTIONSCO
55Aero-48 Manual del usuario/ User´s manual6.OPERATING PARAMETERSOne of the most important parts of a multi-way sound reinforcement system is the digi
PINS 4± 4 x M-10N4 x M-10N8 x 8MN8 x 8MN8 W8 W4 W4 W4 W4 W4 W4 W600 W600 W1000 W1000 W1000 W1000 W1000 W1000 W600 W / 8 W600 W / 8 W1000 W / 4 W1000 W
1. SYSTEM DESCRIPTIONThe D.A.S. Audio AERO series offers twounits for applications requiring precise control of thevertical coverage and high sound pr
SOUND PRODUCTS®AERO-48seriesINTRODUCTIONThe AERO-48 is an externally powered,high efficiency line array module which integrateslow, mid and high frequ
AERO-218SUBseriesINTRODUCTIONThe AERO-218SUB is a high efficiency,arrayable subwoofer unit designed to provide lowfrequency reinforcement for the AERO
US/AERO-01D.A.S AUDIO, S.A. C/. Islas Baleares, 24 - 46988 Fuente del Jarro - Valencia, SPAIN Tel. 96 134 0525 - Tel. Intl. +34 96 134 0860 Fax. 96 1
2. RIGGING SYSTEM2.1WARNINGThismanual containsneeded information forflying DAS Audio line array systems, description ofthe elements and safety precaut
STACKFLYFor flying boxes and defining the splayangle, the pins must be inserted in the slot of guide 2,G2A48, whereas for stacking ( ), the pin goesth
2.3 SAFETY FACTORSbreaking load limit and themaximum safe working load limit (SWLL). In thiscase, the breaking load limit of each of the flyingpoints
3. ASSEMBLING AN ARRAY3.1TRANSPORTING THE CABINETSAERO-48 units can be transported by usingthe front panel dolly PL-48 or by using the PL-48Ssteeldoll
Lifted by way of the rear hoistuntil the wheels of the PL-48dolly platform are off the ground.Once the first box has been placed at 0º andraised appro
Lift the box and introduce theG1A48 guides securing themwith the safety pins.Once the boxes have been joined, the frontdolly panels can be removed. Th
Comments to this Manuals